Description
We are proud to present our latest product, a upgraded super low noise power supply v.2. It is an evolution of the previously built low noise power supply. Built with high-quality discrete components, it provides clean, interference-free power to your devices. Made in a black steel housing with integrated IEC socket with switch and fuse. It is only compatible with 220 – 240V networks.
Specification:
-
- special housing construction isolating the transformer and the AC part from the electronics and the regulator
- dedicated 50VA toroidal transformer with increased amount of copper
- large capacity of the input filter – over 22000uF
- additional active ripple filter with a soft start procedure with a 1-second start-up time.
- low noise floor: -148dB to -176dB in the range from 100Hz to 100kHz
- low noise level: <4 uV AC RMS for the 0-20kHz frequency band (6 uV in the 0 to 100kHz range)
- low Peak-Peak voltage: <50uV
- maximum allowable current 2.5A (3A up to 60 seconds)
- set includes an OFC 4N IEC cable (EU plug 3 x 0.75mm) and a DC cable on the GX16 connector.
- output voltage regulation from 9 to 10V (other options available on request)
- dimensions: 120 mm width, 53 mm height, and 215 mm depth
- weight: 1.7 kg
All measurements were made with a current load of 1A. The power supply is characterized by a constant noise level up to 2.5A load. Each power supply is tested before shipment and has individual ripple and noise measurement results attached to it.
Reviews
There are no reviews yet.